Mechanical Maintenance Technician-Building & Utilities
Company Name:
Bel Brands USA
Maintain and repair building, utilities and infrastructure equipment. Assemble, install, test, and maintain utilities equipment, apparatus, fixtures, etc. using hand tools, power tools and test equipment. Operate, monitor and optimize boilers, chillers, air compressors and other utilities equipment. Perform preventive maintenance, corrective maintenance, and drive equipment improvements.
Essential Duties and Responsibilities
Monitor utilities, building and HVAC system for proper operation and make adjustments and repairs to optimize machine performance.
Oversee the daily operation of the boilers, chillers, HVAC, air compressors, and other equipment while doing mechanical repairs and testing.
Inspect equipment and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
Observe and diagnose malfunctioning machines, systems, apparatus, and components, using test equipment and hand tools to locate the cause of a breakdown or operational problem.
Clean, lubricate, adjust and repair machinery and equipment.
Disassemble machinery to inspect for defects and replace compromised components. Reassemble machinery according to manufacturer's procedures.
Operate newly repaired equipment to verify the adequacy of repairs. Work with production employees and electrical technicians on re-commissioning procedures.
Perform preventive and predictive maintenance inspection on equipment using specialized test equipment including ultra-sonic, thermography and vibration analysis.
Understand and safely work with 3 phase AC power circuits (227-480V), 110V circuits and low voltage systems.
Study blueprints and manufacturers manuals to determine correct installation and operation of machinery.
Understanding of NFPA arc flash hazards and acceptable industry practices to remain within compliance of these rules
Ability to repair and fabricate components using shop machine tools and applicable welding techniques.
Construct and fabricate parts and replacement components using hand tools and specifications.
Repair damaged components and effectively assess the needs for replacement.
Effectively use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment .
Perform business management duties such as maintaining records and files with a CMMS system, preparing reports, ordering supplies and equipment.
Maintain a clean work area and follows sanitation standards set forth by Quality Department, HACCP, GMP, FSSC and other standards.
Organize, plan, and prioritize work - Develop specific goals and plans to prioritize, organize, and accomplish the work.
Personal computer proficiency, ability to communicate through email, phone, written documents or other forms of communication.
Make decisions and solve problems - Analyze information and evaluate results to choose the best solution and solve problems.
Communicate with supervisors, peers, and production employees. Provide information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Obtain and utilize information - Observe, receive, and otherwise obtain information from all relevant sources.
Update and use relevant knowledge - Keep up-to-date technically and apply new knowledge to the job.
Think creatively - Develop, design, or create new applications, ideas, relationships, systems, or products, including artistic contributions.
Minimum education and
Experience:
Requires education equivalent to a High School Diploma plus 1 to 3 years of trades training in industrial maintenance or other technical discipline.
An AAS degree in HVAC, industrial maintenance or similar technical trade is preferred.
Experience with the operation of boilers, chillers, air compressors, HVAC and other utilities equipment is required.
Specific competencies:
A complete commitment to personal and coworker safety and adherence to rules and procedures is expected.
Ability to read and understand blueprints, schematic and mechanical drawings.
Ability to function as a team member and contribute to group goals.
Ability to operate a variety of hand and power tools, such as grinders, saws, machine tools, and welding equipment.
Requires good knowledge of the process equipment and strong mechanical aptitude.
Requires the ability to work in confined spaces.
Requires good oral communication skills to effectively deal with coworkers.
Date: 2014-04-17
Country: US
State: SD
City: Brookings
Category: Engineering
Job Type: Regular Full-TimeEstimated Salary: $20 to $28 per hour based on qualifications.
Bel Brands USA
Maintain and repair building, utilities and infrastructure equipment. Assemble, install, test, and maintain utilities equipment, apparatus, fixtures, etc. using hand tools, power tools and test equipment. Operate, monitor and optimize boilers, chillers, air compressors and other utilities equipment. Perform preventive maintenance, corrective maintenance, and drive equipment improvements.
Essential Duties and Responsibilities
Monitor utilities, building and HVAC system for proper operation and make adjustments and repairs to optimize machine performance.
Oversee the daily operation of the boilers, chillers, HVAC, air compressors, and other equipment while doing mechanical repairs and testing.
Inspect equipment and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
Observe and diagnose malfunctioning machines, systems, apparatus, and components, using test equipment and hand tools to locate the cause of a breakdown or operational problem.
Clean, lubricate, adjust and repair machinery and equipment.
Disassemble machinery to inspect for defects and replace compromised components. Reassemble machinery according to manufacturer's procedures.
Operate newly repaired equipment to verify the adequacy of repairs. Work with production employees and electrical technicians on re-commissioning procedures.
Perform preventive and predictive maintenance inspection on equipment using specialized test equipment including ultra-sonic, thermography and vibration analysis.
Understand and safely work with 3 phase AC power circuits (227-480V), 110V circuits and low voltage systems.
Study blueprints and manufacturers manuals to determine correct installation and operation of machinery.
Understanding of NFPA arc flash hazards and acceptable industry practices to remain within compliance of these rules
Ability to repair and fabricate components using shop machine tools and applicable welding techniques.
Construct and fabricate parts and replacement components using hand tools and specifications.
Repair damaged components and effectively assess the needs for replacement.
Effectively use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment .
Perform business management duties such as maintaining records and files with a CMMS system, preparing reports, ordering supplies and equipment.
Maintain a clean work area and follows sanitation standards set forth by Quality Department, HACCP, GMP, FSSC and other standards.
Organize, plan, and prioritize work - Develop specific goals and plans to prioritize, organize, and accomplish the work.
Personal computer proficiency, ability to communicate through email, phone, written documents or other forms of communication.
Make decisions and solve problems - Analyze information and evaluate results to choose the best solution and solve problems.
Communicate with supervisors, peers, and production employees. Provide information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Obtain and utilize information - Observe, receive, and otherwise obtain information from all relevant sources.
Update and use relevant knowledge - Keep up-to-date technically and apply new knowledge to the job.
Think creatively - Develop, design, or create new applications, ideas, relationships, systems, or products, including artistic contributions.
Minimum education and
Experience:
Requires education equivalent to a High School Diploma plus 1 to 3 years of trades training in industrial maintenance or other technical discipline.
An AAS degree in HVAC, industrial maintenance or similar technical trade is preferred.
Experience with the operation of boilers, chillers, air compressors, HVAC and other utilities equipment is required.
Specific competencies:
A complete commitment to personal and coworker safety and adherence to rules and procedures is expected.
Ability to read and understand blueprints, schematic and mechanical drawings.
Ability to function as a team member and contribute to group goals.
Ability to operate a variety of hand and power tools, such as grinders, saws, machine tools, and welding equipment.
Requires good knowledge of the process equipment and strong mechanical aptitude.
Requires the ability to work in confined spaces.
Requires good oral communication skills to effectively deal with coworkers.
Date: 2014-04-17
Country: US
State: SD
City: Brookings
Category: Engineering
Job Type: Regular Full-TimeEstimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
